實際應用中主要使用在結構物的引發縫、完全收縮縫、不完全收縮縫等部位。具有與混凝土錨固緊密、止水密封及彈性拉伸變形等特點，止水帶系采用彈性材料，并摻加多種輔加助劑，經混煉、硫化而制成。
In practical application, it is mainly used in the initiation joints, complete contraction joints, incomplete contraction joints and other parts of the structure. It has the characteristics of close anchoring with concrete, water sealing and elastic tensile deformation. The water stop belt is made of elastic material and mixed with a variety of auxiliary additives, and is made by mixing and vulcanizing.
遇水膨脹橡膠止水帶具有普通橡膠止水帶的性能外，其主要特點是內防水線采用了具有遇水膨脹工程的特殊橡膠制成。這樣在膨脹橡膠遇水膨脹后增強了止水帶和構筑物的緊密度，使防水、止水效好。
The water swelling rubber water stop strip has the performance of the ordinary rubber water stop belt, and its main feature is that the inner water resisting waterline is made of special rubber with water expansion engineering. Thus, when the expansion rubber meets the water expansion, the tightness of the water stop belt and the structure is enhanced, and the waterproof and water stopping effect is good.
遇水膨脹橡膠止水帶膨脹防水線部分膠料執行GB18173.3-2002標準。
Water swelling rubber sealing strip expansion anti water line part of rubber to implement GB18173.3-2002 standard.
其余部分橡膠與普通橡膠止水帶物理機械性能相同，執行GB18173.2-2000標準。
The rest of the rubber and ordinary rubber waterproof belt physical and mechanical performance is the same, the implementation of GB18173.2-2000 standard.
二、代號表示方法及適用范圍止水帶膠膠種：（NR)表示天然膠;（CR)表示氯丁膠。產品代號：HJ表示我公司生產的。HJ（NR）型表示采用我公司生產的橡膠止水帶，材料為天然橡膠。適用于淡水防滲工程，適用溫度-40～60℃。HJ（CR）型表示采用我公司生產的橡膠止水帶，材料為氯丁橡膠。適用于含酸堿等污水防滲工程，適用溫度－35～60℃。HJ（NBR）型表示采用我公司生產的橡膠止水帶。適用于含石油基油類的污水防滲工程，適用溫度-35～60℃。
Two, code representation and scope of application: tape (NR) means natural glue; (CR) means chloroprene rubber. Product Code: HJ means the product produced by our company. HJ (NR) represents the rubber water stop produced by our company, and the material is natural rubber. It is suitable for fresh water seepage prevention project, applicable temperature -40 ~ 60 degrees centigrade. HJ (CR) represents the rubber water stop produced by our company and the material is chloroprene rubber. Suitable for acid sewage seepage control project, suitable temperature to 60 DEG C - 35. HJ (NBR) represents the rubber water stop produced by our company. It is suitable for sewage impervious engineering with petroleum base oil, applicable temperature -35 ~ 60 degrees centigrade.
三、橡膠止水帶技術標準
Three. Technical standard of rubber water stop belt
1．我公司生產的橡膠止水帶是采用國家標準GB18173.2-2000標準組織生產的，尺寸公差一律按國家標準執行，如用戶有特殊要求，可按用戶要求制造。
1. the rubber water stop produced by our company is produced by the national standard GB18173.2-2000 standard. The size tolerance is carried out according to the national standard. If the user has special requirements, it can be manufactured according to the requirements of the user.
2、我公司可按用戶要求生產各種形狀、尺寸的橡膠止水帶，另外還可為不同工程、不同部位的需要備有十字型、丁字型、斜度型和內外轉角型產品，可適用于任何設計要求。
2, my company can according to the production of various shapes and sizes of rubber sealing requirements, need also for different parts of engineering, preparation of a cross shaped, inclination angle and internal and external products, can be applied to any design requirements.
3、橡膠止水帶在運輸時，應要避免陽光直射，勿與熱源、油類及有害溶劑接觸。成品應取直平放，勿加重壓。存放場所保持-10-+30，相對濕度40%-80%。
3, the rubber sealing strip during transportation, should avoid direct sunlight, do not contact with heat, oil and harmful solvent. The finished product should be straight and flat, without heavy pressure. Storage place kept -10-+30, relative humidity 40%-80%.

查看全部介紹